HOW TO MAKE A DUMMY WITH YOUR BODY DIMENSIONS - COME CREARE UN MANICHINO CON LE DIMENSIONI DEL PROPRIO CORPO

One problem of the prop maker and cosplayer is how to make a dummy with the same body dimension of the maker. Well, now is possible with some simple material and simple passage.

1- Dummy need an internal skeleton, this can be realized with plastic tubes of few inch or with some wooden strips. I used 6 wooden strips long 1 meter. When you saw the various strips remeber that: legs should be longer because they should be established on a support base, pelvis and shoulder should be a little short respect to real dimensions.

2- Get cellophan and scotch tape. Wrap your body with the cellophan, cellophan should be snug to body. Now wrap your body with the scotch on the cellophan. Do not leave empty spots.

3- With scissors cut the casing of cellophan and scotch along the central part of the legs, abs and arms. Attention: scissors must has rounded tips!

4- Place the casing on the skeleton and  fill it with synthetic wool, closing the cuts with scotch.

5- The dummy is complete, now you can add a styrofoam head.

If the tutorials were helpful and you want to support my work then make a small donation here

ARC REACTOR 3 - HOW TO MAKE

In questa serie di video vi mostrerò come ho realizzato il mio Arc reactor 3 ispirato al modello del film di Iron Man 2. I materiali usati sono molto semplici e facilmente reperibili in tutti i super mercati. Inoltre il tutto può essere realizzato in pochissimo tempo senza troppo sforzo. Il risultato non è ottimale ma può comunque essere definito abbondantemente buono.

If the tutorials were helpful and you want to support my work then make a small donation here.

"Se i tutorial ti sono stati utili e desideri supportare il mio lavoro fai una piccola donazione qui"